The precautions for truck elevators vary, specifically as follows:
When opening and closing doors, it is necessary to open and close them gently. (To prevent the door rope from slipping out of the groove or damaging the door safety switch)
When loading and unloading goods, please place them in the middle of the elevator car (at least 5cm away from the side of the elevator car) to prevent them from getting stuck.
After taking out the goods, the hall door of that floor should be closed and secured by hand until the door opening light or occupancy light on the calling panel goes out, to ensure the normal use of other floors.
When the elevator is not stuck or malfunctioning, do not touch the emergency stop switch. When the emergency stop switch is triggered, the emergency stop light or occupancy light on the calling panel will light up. At this time, the fault should be eliminated, and the emergency stop switch should be reset until the emergency stop light or occupancy light on the calling panel is off before the elevator can be used normally.
